Print This Page  Close This Window
2-Jaw, 3-Jaw, 4-Jaw & 6-Jaw Master Grip Chucks
       
MGC-2
MGC-3
MGC-4
MGC-6
 
These chucks are available with 2 jaws, 3 jaws, 4 jaws and 6 jaws and are referred as MGC-2, MGC-3, MGC-4 and MGC-6 respectively. The Jaws are made in two portions. There is one threaded base which is hardened. One set of reversible hard top and one set of soft jaw is provided with each chuck. These top jaws are tightened on the base with allen bolts. The advantage of these chucks is that special type of jaws can be made at user's end to suit any type of job which is not possible with normal jaws. Mounting Bolts, Allen Key, Operating Key and Inspection Report is provided with each chuck
*Product
Code		 Size in mm A B C D E F G H J K/M L N T
WEIGHT IN KGS
(APPROX.)
2 JAW
3 JAW
4 JAW
6 JAW
1006-803 80 83 45 19 22 16 33 71.3 63.5 3 M5 140 6 12 2.1 2.3 -- --
1006-1003 100 103 52 26 30 22 42 89 76.2 3 M6 175 8 12 3.3 3.6 3.8 --
1006-1253 125 125 55 35 37 22 50 108 95 4 M8 175 8 15 4.4 4.7 4.9 --
1006-1603 160 160 70 42 44 28.8 72 140 125 6 M10 215 10 20 10 10.6 11.5 13.1
1006-2003 200 200 78 55 49 30.5 85 176 160 7 M10 285 12 22 16.2 17.2 18.4 21.0
1006-2303 230 230 78 70 49 30.5 85 205 180 7 M10 285 12 22 21.7 22.7 24.2 27.2
1006-2503 250 250 86 76 51 30.5 102 224 200 7 M12 315 13 25 27.1 28.1 30.0 34.2
1006-2703 270 270 86 90 51 30.5 102 245 220 7 M12 315 12 25 29.8 30.9 32.7 36.8
1006-3153 315 315 88 105 56 35.25 116 286 260 7 M12 350 14 25 41.5 43.1 45.8 52.2
1006-4003 400 400 95 140 70 42 150 362 330 7 M16 450 16 32 74.5 77.0 80.7 90.0
1006-5003 500 500 110 190 75 50 170 458 420 7 M16 520 18 32 122.0 126.0 133.0 146.0
1006-6003 600 600 110 260 75 50 170 558 520 7 M16 620 18 32 162.0 166.0 173.0 186.0